-
RWA 1432 2.3 #2 Mechanical slider cam. .465" lift, 240 duration @.050"., 116 lobe center. For use with stock length valves. User our RWA 1470 valve springs and RWA 1476A retainers for best results. Cylinder head must be converted from hydraulic to solid lift, use our RWA 1488 mechanical lash adjuster set for this. This is a great mild race cam or street cam. -
Out of stock
RWA1434 3A Mechanical slider cam, .510 lift, .264 duration @.050"., 103/113 lobe center. This camshaft requires .100" longer valves, use our RWA 1495 and RWA 1497 or .100" lash caps RWA 1413-23. The cylinder head must be converted from hydraulic to the shorter RWA 1489 type B mechanical lash adjusters. The use of our RWA 1472 springs and RWA 1476B retainers are required for use with this camshaft. Power is in the 3700-7000 rpm range. This is a great short track cam.
-
Out of stock
RWA 1433 #3 Mechanical slider cam .535" lift, .274 duration @.050"., 103/113 lobe center. This camshaft requires .100" longer valves RWA 1495 and RWA 1497 or .100" lash caps RWA 1413-23. The use of our RWA 1472 springs and RWA1476B retainers is required. The cylinder head has to be converted to the short solid lifters, use our RWA 1489 mechanical lash adjuster set. Power is in the 4000-7500 rpm range. This is a great longer track cam.
-
RWA 1533 2.3 cam bearing set. It is a good idea to keep an eye on your cam bearings, excessive valve spring pressure leads to premature wearing of the cam bearings. Our cam bearings are the best on the market, manufactured by Durabond, we have used these for years without any failures. -
RWA 1501-23 Lash caps are .100" thick and designed to work on 11/32" diameter valve stems. These lash caps are required when using a stock length valve and a small base circle camshaft. -
RWA 1506 Mouse trap spring set, originally found on the 2.0L Pinto but are commonly used on the 2300 mechanical lash adjusters to stabilize the follower under the cam. Set of 8 springs & clips.