-
Out of stock
We highly recommend this manifold/carb combination for street driving. It will perform well with a stock or modified engine. This is the correct Holley 390 (0-6299) for the small engines . This carb gives excellent gas mileage, as the primary bores of the 390 are actually smaller than the stock Pinto carb bores. When you get up in the rev range the vacuum operated oversize secondary bores open up for plenty of power. The kit comes with a linkage kit to ease installation. There is also a chrome air cleaner assembly that comes with this kit (not shown). -
RWA1116C is designed to work on the "Pinto" 2.0 engines. This is a high quality cast aluminum intake and is designed to work with 40/45 DCOE Webers or Dellorto DHLA carbs. The runners on this intake are 35mm/1.25" long. This intake should be used if you have clearance issues. Includes mounting hardware for the carbs. -
RWA1116A is designed to work on the "Pinto" 2.0 engines. This is a high quality cast aluminum intake and is designed to work with 40/45 DCOE Webers or Dellorto DHLA carbs. The runners on this intake are 86mm/3.5" long. If you have clearance issues, you can use RWA1116C, this intake is a short version with 35mm/1.25" long runners. -
RWA1104 Weber soft mount kit is used to mount 2 weber side draft carbs to the intake. These kits help keep the vibration down in the carb. Made from a hard plastic they come with rubber o rings.