- Cover snaps on for easy removal and replacement.
- Belt openings double stitched for added strength.
- Extra stitching and material on all stress points.
- Contoured high-density foam bottom provides complete leg and inner thigh support.
- Extra high-density foam on rib supports for added comfort.
-
Out of stock
Black vinyl, Black tweed (cloth), and Red Tweed (cloth) are all cover fully padded quilted cover for comfort. -
KIRKEY RACING ECONOMY DRAG SEAT RWA16800, Drag Racing Seat. Drag car. Available in 17-1/2". Designed for entry level low horse power drag cars on small tracks. 20 degree layback for driver comfort. Seat side lowered for lap belts. MIG welded .125" think 5052 grade aluminum. Progressive rib bead adds extra strength. Seat bottom is contoured to support lower back and hips. Rib supports cut back for easy entry and easy shifting. Comes standard with shoulder belt and sub belt openings. Rubber moulding around perimeter of seat. Headrest reinforced with offset aluminum extrusion. Cover sold separately RWA16811T (Tweed) -
KIRKEY RACING ALUMINUM DRAG SEAT- Designed for all drag cars, pro street, door slammers, drag racing cars.
- Available in five (5) sizes, 15",16",17",18" and 20" Big Boy.
- Constructed from TIG and MIG welded .100" thick 5052 grade aluminum.
- Extra MIG welding on the inside for added strength.
- Offset aluminum extrusion around perimeter of seat for added strength and safety.
- Reinforced head rest. Front of seat raised for leg and thigh support.
- Seat comes standard with double shoulder belt openings and sub belt opening to accommodate all belt systems.
- Molded rubber inserts for all seat belt openings.
- Easy installation with optional bottom and rear seat mounts-(sold separately).
- Cover sold separately.
-
KIRKEY RACING ALUMINUM LAYBACK SEAT RWA38160. Designed for street stocks, IMCA modifieds, limited late models, mini modifieds, dwarf cars, legends or any entry level division. We stock two sizes 16" and 17". Other sizes available on special order (14", 15", 18 1/2" and 20"). Unique bottom design allows seat to be mounted in multiple layback angles without raising center of gravity in the race car. Seat comes with bolt on rib braces and a welded interior head rest plate for additional strength. Constructed from TIG and MIG welded .100" thick 5052 grade aluminum. Extra MIG welding on the inside for added strength. Offset aluminum extrusion around perimeter of seat for added strength and safety. Front of seat raised for leg and thigh support. Seat comes standard with lap belt openings, double shoulder belt openings and sub belt opening to accommodate all belt systems. Molded rubber inserts for all seat belt openings. Easy installation with optional bottom mounts (pt.# 99214) and rear mount (pt.# 99212). SOLD SEPARATELY. Cover available in black vinyl and black cloth. SOLD SEPARATELY. -
KIRKEY RACING ALUMINUM VINTAGE CLASS BUCKET SEAT.- Designed for vintage cars, rat rods, hot rods, kit cars.
- Low back design for the vintage look.
- Available in four (4) sizes, 15",16",17",18.5". TIG and MIG welded .100" thick 5052 grade aluminum.
- Extra MIG welding on inside for added strength.
- Offset aluminum extrusion around perimeter of seat for added strength and safety.
- Seat comes standard with lap belt openings and sub belt opening to accommodate all belt systems.
- Molded rubber inserts for all seat belt openings.
- Easy installation with optional bottom and rear seat mounts-(sold separately).
- Cover sold separately.
-
RWA 99214 replaces RWA 99204. Side mount for the NEW 38 Series seat. Will also fit 09, 16, 36, 39, 41, 41V, 47, 55, 70, and 71 series seats. Constructed using 3/16" high quality aluminum. Bolts to the side of the seat and then to roll cage or a structural member on the floor. NEVER mount to sheet metal. Has a variety of bolt patterns to adjust the height and layback of the seat. Some fabrication required. -
KIRKEY RACING ALUMINUM ROAD RACE SEAT.- KIRKEY RACING ALUMINUM ADJUSTABLE ROAD RACE SEAT. Designed for road race cars, kit cars, club racing. Bottom design allows multiple layback angles from 18 to 23 degrees. Available in four (4) sizes 15", 16", 17", 18-1/2". Constructed from TIG AND MIG welded .100" thick 5052 grade aluminum. Vertically adjustable 2-1/2" for proper fit. Extra MIG welding on inside for added strength. A true road race design with built in shoulder support. Reinforced headrest with interior double plate. Aluminum extrusion around perimeter for extra strength and safety. Progressive rib bead adds extra strength. Extra support at rib height provides support for high G force cornering but is designed to not interfere with shifting. Molded rubber inserts for lap belt, double shoulder belt and sub belt openings. Seat has additional openings for 6 point belts. Accommodates both 5 and 6 point seat belt systems. Kit comes with extra padded black airknit cover with contour bottom for extra support. Easy installation with optional bottom (pt# 99214) and rear (pt# 99212) seat mounts. Sold seperately.
-
RWA9677 RaceQuip FIA Certified Composite Racing Seats provide the support to hold you firmly in place for increased car control. These seats are certified to FIA 8855-1999 spec with FIA hologram affixed. The design is suitable for professional racing with it's increased thigh and hip support along with extended shoulder and rib bolsters for extra containment. The shell is a one-piece lightweight, FRP hand-laid composite structure built for strength and durability with a fixed back. The design accommodates all Head and Neck restraints and there are five seat belt guides to handle 4, 5 or 6-point harness sets. The seat bottom and back cushions incorporate energy absorbing memory foam for comfort and safety. The seat material is a black mesh fabric for increased breathability with a more durable smooth covering in high-wear areas. The exposed areas of the shell are a shiny black gelcoat for a great look and easier cleaning. There are four built-in 8mm side mount threaded fasteners (brackets not included). Optional RaceQuip brackets allow the seat mounting to go from 0° Upright position to 30° Layback position. Seats weigh about 18lbs and are available in RWA9677-15 15” Medium; RWA9677-16 16” Large and RWA9677-17 17” X-Large sizes.
- FIA 8855-1999 Certification – Hologram Affixed
- Pro Racing Design With Thigh And Hip Support
- Integral Shoulder and Rib Bolsters
- One-Piece Lightweight FRP Composite Shell
- Accommodates All Head & Neck Restraints
- Five Seat Belt Guides Handle 4, 5, or 6 Point Sets
- Energy Absorbing Foam for Comfort And Safety
- Black Mesh Fabric Cover For Breathability
- Shiny Black Gelcoat Finish On Exposed Areas
- Four Built-In 6mm Side Mount Fasteners (Brackets Not Included)
- Optional RaceQuip Brackets Allow Seats to Go From 0° Upright to 30° Layback
- Fixed Back
- NOTE: Each size shown is a distinctly different model with a unique shell and cover
-
SHOULDER BELT INSTALLATION GUIDE FROM SFI Shoulder Belt Angle: 0 to -20° (-10° optimum) from horizontal • Clear passage of webbing from top of shoulder (or head and neck restraint) back to the harness bar or mounting point without any interference of the seat openings • Belts should be as short as possible back to the mounting points
